|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Transmissive Photosensors (Photo Interrupters) CNA1007H Photo Interrupter Unit : mm For contactless SW, object detection Overview CNA1007H is a transmissive photosensor in which a high efficiency GaAs infrared light emitting diode is used as the light emitting element, and a high sensitivity phototransistor is used as the light detecting element. The two elements are arranged so as to face each other, and objects passing between them are detected. (3.2) 14.0 5.00.15 A 6.0 5.0 1.50.15 Device Center (C1) 3.50.5 10.0 2.5 1.3 A' (10.0) 1.8 3 (4-0.45) 1.65 Features Position detection accuracy : 0.3 mm Gap width : 5 mm Horizontal slit type The type directly attached to PCB ( with a positioning pins) +0 1.2 -0.1 2 1 4 Absolute Maximum Ratings (Ta = 25C) Parameter Input (Light Forward current (DC) emitting diode) Power dissipation Collector current Reverse voltage (DC) Symbol Ratings VR IF PD*1 IC 5 50 75 20 30 5 100 - 40 to +100 Unit V mA mW mA V V mW C C Internal connector 2 3 1 Pin connection Output (Photo Collector to emitter voltage VCEO transistor) Emitter to collector voltage VECO Collector power dissipation Temperature *1 PC*2 Tstg Operating ambient temperature Storage temperature Topr -25 to +85 Input power derating ratio is 1.0 mW/C at Ta = 25C. *2 Output power derating ratio is 1.33 mW/C at Ta = 25C. Electrical Characteristics (Ta = 25C) Parameter Input characteristics Reverse current (DC) Forward voltage (DC) Symbol VF IR ICEO VR = 3V VCE = 10V 0.5 5 Conditions IF = 20mA min typ 1.25 max 1.4 10 200 14 0.4 Unit V A nA mA V s Output characteristics Collector cutoff current Collector current IC VCE = 5V, IF = 20mA Transfer Collector to emitter saturation voltage VCE(sat) IF = 40mA, IC = 1mA characteristics Response time tr , tf* VCC = 5V, IC = 1mA, RL = 100 * Switching time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) 90% 10% tr tf tr : Rise time (Time required for the collector current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector current to decrease from 90% to 10% of its initial value) ,, ,, 50 RL ,,, 4 (4-0.45) (2.54) SEC. A-A' 0.50.1 1 CNA1007H Transmissive Photosensors (Photo Interrupters) IF , IC -- Ta 60 60 IF -- VF 1.6 Ta = 25C VF -- Ta IF = 50mA IF , IC (mA) 50 IF 50 IF (mA) Forward current, collector current VF (V) 1.2 10mA 1mA 0.8 40 40 30 IC Forward current 30 20 20 Forward voltage 0 0.4 0.8 1.2 1.6 2.0 2.4 0.4 10 10 0 - 25 0 20 40 60 80 100 0 0 - 40 - 20 0 20 40 60 80 100 Ambient temperature Ta (C ) Forward voltage VF (V) Ambient temperature Ta (C ) IC -- IF 10 2 VCE = 5V Ta = 25C 10 2 IC -- VCE 160 Ta = 25C IC -- Ta VCE = 5V IF = 20mA IC (mA) 10 IC (mA) 10 IF = 30mA 20mA 10mA IC (%) Relative output current 10 2 120 Collector current 1 Collector current 1 80 10 -1 10 -1 40 10 -2 10 -1 1 10 10 2 10 -2 10 -1 1 10 0 - 40 - 20 0 20 40 60 80 100 Forward current IF (mA) Collector to emitter voltage VCE (V) Ambient temperature Ta (C ) ICEO -- Ta 10 3 VCE = 10V 10 2 tr -- IC VCC = 5V Ta = 25C 100 IC -- d 10 2 ICEO (nA) 10 RL = 1k 500 100 80 10 Relative output current 60 Dark current 1 Rise time 1 40 10 -1 10 -1 Sig.IN Sig. OUT 50 VCC Sig. OUT RL 90% 10% 20 10 -2 - 40 - 20 , ,, 0 20 40 60 80 100 10 -2 10 -1 tr td tf 102 0 0 1 2 3 4 5 6 1 10 Ambient temperature Ta (C ) Collector current IC (mA) 2 ,, , 0 d Criterion VCE = 5V Ta = 25C IF = 20mA tr (s) IC (%) Distance d (mm) Transmissive Photosensors (Photo Interrupters) CNA1007H IC -- d 100 80 Relative output current 60 40 20 0 0 1 ,, , Criterion 0 d 2 3 4 5 6 VCE = 5V Ta = 25C IF = 20mA IC (%) Distance d (mm) 3 |
Price & Availability of CNA1007H |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |